How to Order a Cisco AS5400 Universal Gateway

CISCO VOIP Gateways :

Cisco AS5400 Series Universal Gateways

ORDERING GUIDE
HOW TO ORDER A CISCO AS5400HPX UNIVERSAL GATEWAY PRODUCT OVERVIEW
The Cisco® AS5400HPX Universal Gateway offers high-density voice, wireless, fax, and data services. Cisco Any Service for Any Port for Service Providers (ASAP) architecture enables the platform to be used as both a Voice Gateway and a Network Access Server. The rich set of Cisco IOS® Software features available in the Cisco AS5400HPX Universal Gateway makes the platform versatile and deployable in a wide range of network architectures.
The Cisco AS5400HPX Universal Gateway chassis has seven slots that can take trunk cards and Universal Port digital signal processor (DSP) cards. The following feature card options allow you to customize the platform configuration to meet specific customer needs.

This document describes how to order the Cisco AS5400HPX Universal Gateway and the relevant software licenses required for the gateway features.


BEFORE YOU BEGIN
Before you begin, have information ready as indicated by the following questions:

All orders must include one of the basic feature licenses listed in table.

AS5400HPX Basic Feature Licenses Part Number

Optional Feature Licenses

Performance and Capacity
The performance and capacity of the Cisco AS5400HPX Universal Gateway varies for different applications. For typical voice only applications (G.711/20ms), the gateway is designed to service 480 calls at 7-10 calls/second (cps), burst traffic can be supported at up to 100 cps. Consult your Cisco representative for performance characteristics for the specific applications that you will run on the gateway.
The Cisco AS5400HPX Universal Gateway occupies two Rack Units (RUs) = 3.5 inches of rack space. The maximum power consumption of one Cisco AS5400HPX Universal Gateway is 345W in the CT3 configuration with 648 active calls. The heat dissipation is 106 W/feet 2/vert. feet, 683-1177 BTUs/hour.


ORDERING A SYSTEM
We have created easy-to-order bundle options for the most commonly used voice configurations. This saves you time and effort in configuring the Cisco AS5400HPX Universal Gateway and offers a significant pricing advantage. You could choose to have the flexibility in configuring the system and build a system using the Cisco AS5400HPX starter kit.


Ordering Bundles
Pick the appropriate bundle based on the requirements (refer to previous sections).
Each easy to order bundle contains the following products (the quantities of each vary based on the configuration):

Ordering Spares
Memory
The Cisco AS5400HPX chassis comes with the maximum memory sizes shown in Table 2 and you can order spare memory as specified in the table.

AS5400HPX Memory Spares

Chassis and Feature Cards
Order spare chassis and feature cards as required shown in the table.

AS5400HPX Chassis and Feature Card Spares

Miscellaneous Spares
You can order optional 19 or 24-inch rack mount kits (AS5400RM-19/AS5400RM-24), cables, and cable shelves.
For a complete list of all orderable parts, spares, and bundles for the Cisco AS5400HPX Universal Gateway, search for the Cisco AS5400HPX product family on the Pricing Tool at http://www.cisco.com/pcgi-bin/front.x/pricing.


EXAMPLE CONFIGURATIONS
This section provides some typical orders that you can use as a reference order.

Entry Level North American ISP-Voice Service
This is for a North American customer that is beginning an Internet Service Provider business. A flexible Universal Gateway beginning with eight CT1 PRI is required. As they are just starting Voice-Only service and they anticipate rapid growth.

You have determined that a single Cisco AS5400HPX with 192 universal port DSPs (allowing for growth) and the IP-Plus Cisco IOS Software, and the necessary cabling for 110V AC power are required. You have determined that PRI signaling is used.

You could use the easy-to-order bundle AS54HPX-8T1-192AC, which automatically contains the products shown in table.

System Configuration

Large Indonesia ISP-Data OnlyA large ISP in Indonesia wants to add capacity to existing dialup network by adding a network access server to terminate up to 16CE1s terminating at their central office.
You have determined that a single Cisco AS5400HPX with two octal CE1 trunk cards and five NP108 DSP cards and a DC power supply are required. A 1RU Octal cable patch panel is required. The signaling used is E1/R2 and you have verified that R2 country variant for Indonesia is supported and have determined that they would need the ENTERPRISE PLUS IPSEC 3DES Cisco IOS Software. You have determined that voice services may be required soon.
The two options are to configure a system using the Cisco AS5400HPX starter kit or use the easy-to-order bundle AS54HPX-16E1-480AC and add options for what is not present in the bundle. Enhanced voice licenses (FR54H-ENHVOX-LIC) need to be ordered when voice services are deployed.
The complete system configuration using the Cisco AS5400HPX starter kit and adding options for DC power, Cisco IOS Software upgrade, data licenses, and the cable shelf would look like the table.

System Configuration using Starter Kit

Because voice services may be deployed soon, you might consider ordering the bundle-AS54HPX-16E1-480AC. The pricing advantage offered by the bundle offsets the price of the extra Enhanced Voice Licenses required as an upgrade table.

System Configuration using Easy-to-Order Bundle

APPENDIX 1-MANDATORY LICENSES
Ordering bundles automatically include the required licenses with your order. The rules in Tables 7, 8, and 9 help you in nonstandard configurations.

CT1 Licensing Rules

CE1 Licensing Rules

CT3 Licensing Rules

APPENDIX 2-EASY-TO-ORDER BUNDLES
Tables below provide details of easy-to-order voice bundles for different port densities.

Low-Density Voice Bundles

VXML Bundles

High-Density Voice Bundles